Pro Gabions ®

This post is also available in: Dutch French


The gabion is assembled from hard drawn steel wire panels. The panels are created by flash welding horizontal and vertical wires perpendicular at every intersection. All the vertical joints are connected using helicals by threading them through the meshes to allow folding of the unit. The ends need to be twisted inwards 90° to avoid that the spirals get loose. Base and top panels are attached with 1 spiral to the front and back panels. Accessories are included for final construction on site. Find an overview below. 

Pro-Gabion 0.5x0.5x0.5

Our standard unit is composed out of panels using a 76.2×76.2mm mesh or 3″x3″. the gabions are availbale with a 3mm or a 4.55mm wire diameter or a combination of both. Our Pro-Gabions® have a Zinc – Aluminium coating of 350gr/m² to assure a maximum lifetime. Thanks to our flexibility we can offer you a range of other options to suit your specific project needs. Find an overview of these options below.

Available mesh sizes

  • 50 x 50mm
  • 50.8 x 50.8mm
  • 50 x 100mm
  • 50.8 x 101.6mm
  • 100 x 100mm
  • 101.6 x 101.6mm
  • 75 x 75mm
  • 76.2 x 76.2mm

Available wire diameters

  • 3mm
  • 4mm
  • 4.55mm
  • 5mm

Available coating types

  • Galvanised in accordance with class A = min. 280gr/m²
  • Galfan coating 350gr/m² (95%Zn + 5%Al)
  • Galvanised 280gr/m² + PVC 0.50mm